Broadcast SRC-32 Guia de Instalação descarregar pdf (Página 11)

GPI Install Guide

_____________________________________________________________________

Other Notes:

When using more than one unit, one must set the dip switches on each unit

accordingly. DAD MUST talk to the unit that is defined as the Master (unit 0). The sync

cable between the units must be connected to the EXT2 on the master and connected

to the EXT1 on the slave unit.

Also, one must remember to modify the DAD workstation CFG file to reflect the proper

amount of inputs and outputs.

For example: GPO_GPI = 64 64 128

IMPORTANT:

If one has followed all instructions above and can not get the unit to function properly,

there is a chance that one MIGHT have to install the DADPIO with the default address.

For example, run the C:\DAD\DRIVERS\AutoInst.BAT file

This will install the DADPIO with the default address of 300.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Sem comentários

Broadcast SRC-32 Guia de Instalação Página 11